Lubricants
Additive Lubricating Oil – Closed Systems
Additive Lubricating Oil - Closed Systems (product 592) is a high-quality oil additive with SBC (Security Brake Complex) and has been developed for addition to the oil of transmissions, engines, hydraulic installations, etc. The product guarantees optimal lubrication and efficient use of the transmission , engine, hydraulic installations, bearings and metalworking. It contains no inert substances and leads to optimal boundary lubrication. Additive Lubricating Oil – Closed Systems has a metallurgical effect and acts as a sliding layer at extremely high pressures. Reduces stick-slip, friction and wear Lower oil and fuel consumption Extends the life of the oil Download SDS Additive Lubricating Oil – Closed Systems
€596,05
Electrical Components – Protection
Electrical Components - Protection (product 779) is a highly concentrated acid-free preservative based on chlorine-free solvents, for all types of electronic components. The product has been developed to dispel moisture and then forms a flexible protective layer to prevent moisture and dirt from penetrating. Use Electrical Components - Protection for lubricating controls, relays, switches, plugs, etc. The product protects the components not only against moisture and dirt, but also against (chemical) vapors. Expels moisture Forms a flexible film Prevents corrosion formation Prevents damage to all electrical components. Download SDS Electrical Components – Protection Download SDS Electrical Components - Protection - aerosol
€165,89
Food FDC - Ceramic Lubricating Oil High Vibration and Shock Load up to 250°C - Food Safe Surfaces
Food FDC - Ceramic Lubricating Oil High Vibration and Shock Load up to 250°C - Food Safe Surfaces (product 493) is a high-quality synthetic H1 registered lubricating oil with FDC (Friction Delay Complex), for "filling" irregularities in and tolerances between the metal surfaces and for "emergency running". Food FDC - Ceramic Lubricating Oil High Vibration and Shock Load up to 250°C - Food Safe Surfaces is mainly used for lubricating and/or preserving conveyor belts, chains and parts in the food processing and pharmaceutical industries. It is ideally suited for lubricating chains, hinges and sliding surfaces that are subject to high vibration, shock, point pressure and shear forces under extreme temperatures. In addition, it repels rust, dirt and water. Extremely good emergency lubrication Preservative for metal Perfectly water and steam resistant Reduce the lubrication frequency by a factor of 3 to 5. Download SDS Food FDC - Ceramic Lubricating Oil High Vibration and Shock Load up to 250°C - Food Safe Surfaces
€633,44
Food SP – Chemical Lubricating Oil High Vibration and Shock Load up to 140 °C – Food Safe Central Lubrication
Food SP – Chemical Lubricating Oil High Vibration and Shock Load up to 140 °C - Food Safe Central Lubrication (product 504) is a high-quality H1 registered lubricating oil, with SP (specialty) and EP (extreme pressure) additives. Food SP – Chemical Lubricating Oil High Vibration and Shock Load up to 140 °C - Food-safe Central Lubrication is mainly used for lubricating chains, gears, guides and moving metal parts of machines and installations in the food processing and pharmaceutical industries, which are subject to extreme vibration and shock loads and temperatures. The product prevents stick-slip and is suitable for central lubrication, such as air tools, chains and shrink tunnels. Sustainable lubrication Effective at peak loads Suitable for central lubrication Download SDS Report Food SP – Chemical Lubricating Oil High Vibration and Shock Load up to 140 °C – Food Safe Central Lubrication
€526,35
Food T (H1) - General Lubricating Oil - Food Safe Surfaces
Food T (H1) - General Lubricating Oil - Food Safe Surfaces (product 526) is a high-quality synthetic H1 registered lubricating oil, with AW (anti-wear) and EP (extreme pressure) additives. The product does not contain any PTFE (polytetrafluoroethylene). Food T (H1) - General Lubricating Oil - Food Safe Surfaces is mainly used for lubricating and/or preserving conveyor belts, link chains, chains, guides, stainless steel surfaces and parts of packaging machines in the food and pharmaceutical industries. Extremely good start-up protection Preservative for metal Water and steam resistant Download SDS Food T (H1) - General Lubricating Oil - Food Safe Surfaces Download SDS Food T (H1) - General Lubricating Oil - Food Safe Surfaces - Aerosol
€170,97
Ceramic Lubricating Oil High Vibration and Shock Load up to 250 °C – All Surfaces
Ceramic Lubricating Oil High Vibration and Shock Load up to 250 °C - All Surfaces (product 537) is a high-quality synthetic lubricating oil with FDC (Friction Delay Complex) and SBC (Security Brake Complex) for ''filling'' irregularities in and tolerances between the metal surfaces and for emergency running. Ceramic Lubricating Oil High Vibration and Shock Load up to 250 °C - All Surfaces is mainly used for lubricating and/or preserving conveyor belts, chains, cables, hinges, gears, switches and parts. It is ideally suited for lubricating chains, hinges and sliding surfaces that are subject to high vibration, shock, point pressure and shear forces under extreme temperatures. Moreover, it repels rust, dirt and water. Extreme protection against wear Built-in "high pressure emergency lubrication" Low lubrication frequency Reduce the lubrication frequency by a factor of 3 to 5. Download SDS Ceramic Lubricating Oil High Vibration and Shock Load up to 250 °C - All Surfaces
€669,13
Cooling Lubricant - Anti-Foam Additive
Cooling Lubricant - Anti-Foam Additive (product 724) is a foam-reducing additive for addition to the range of semi-synthetic cooling lubricants. Efficient and effective High tool life Also effective in hard water
€349,93
Teflon Lubricating Oil High Contamination – Food Safe Surfaces
Teflon Lubricating Oil High Contamination - Food Safe Surfaces (product 515) is a high-quality synthetic lubricating oil with PTFE (polytetrafluoroethylene) for “filling” irregularities and tolerances between metal surfaces and for “emergency running”. In addition, the product contains EP (extreme pressure) and anti-corrosion additives. Teflon Lubricating Oil High Contamination - Food Safe Surfaces is mainly used for lubricating and/or preserving conveyor belts, chains, guides, stainless steel surfaces and parts of packaging machines in the food and pharmaceutical industries. The product also ensures that dust and dirt cannot penetrate. An additional advantage is that the product prevents the adhesion of dirt on conveyor belts, for example, which increases the lifespan and ease of maintenance. Extremely good start-up protection Preservative for metal Water and steam resistant Reduce the lubrication frequency by a factor of 3 to 5. Download SDS Teflon Lubricating Oil High Contamination – Food Safe Surfaces Download SDS Teflon Lubricating Oil High Contamination - Food Safe Surfaces - aerosol
€179,32